| No. | Name | Specification |
| 1 | Total pressure(KN) | 12000KN/ 1200T |
| 2 | Specific pressure (kg/cm2) | ≤40kg/cm² |
| 3 | Finished product size (mm) | 1220mm×2440mm |
| 4 | Main cylinder diameter (mm) | Φ320mm |
| 5 | Main cylinder stroke | 200mm |
| 6 | Main cylinder units | 6 |
| 7 | Lift cylinder diameter (mm) | Φ63mm |
| 8 | Lift cylinder stroke | 200mm |
| 9 | Lift cylinder units | 4 |
| 10 | Hydraulic system pressure | 25Mpa |
| 11 | Speed of loading device (m/min) | 10m~20m/min PLC control |
| 12 | Hot plate size (mm) | 1400×2600mm |
| 13 | Top hot plate thickness (mm) | 140mm |
| 14 | Bottom hot plate thickness (mm) | 100mm |
| 15 | Hot press board temperature | 0~250° digital/ adjustable |
| 16 | Heat consumption (Kcal/h) | 200,000Kcal |
| 17 | Temperature homogeneity | ±1.5° |
| 18 | Heating medium | Heating oil |
| 19 | Time to close platens till reach enough pressure | 6s |
| 20 | Time to lift platen | 4s |
| 21 | Control mode | PLC |
| 22 | Total power (kw) | 30kw |
| 23 | Overall dimension (L×W×H) | 3900mm×1500mm×3100mm |
| 24 | Net weight (T) | 36 T |
| 25 | Daily output (piece/day) | 1200~1400 sheets |
| 26 | The electrical box | Touch screen |
| 27 | Big fuel tank | Inside cooling system |
| 28 | Hydraulic pump station | Made in Taiwan |
| 29 | Moulding cycle | Less than 55 second |
| 30 | Price CFR CHITTAGONG |
|
| 31 | Main hot press with loader&unloader |
|
| 32 | Mould plate(Glossy,Mate, Svade & Emboss finish) |
|
| 33 | Cushion pad |
|
NOTES:
The total price just include two mould plates,the buyer can decide how many pieces and types want to buy .we usual suggest buyer one type need purchase two pcs.
A.This design includes bellow standards:
1.Belt loading table
2.Main press
3.2 pcs of cushion pad and seals
4.Temperature sensor control system
5.Belt unloading table
| No. | Name | Quantity |
| 1 | 1200T 1200T double side laminating press machine | 1 set |
| 2 | Automatic feed trolley | 1 set |
| 3 | Rack wheel discharge gate | 1 set |
| 4 | Electrical control system | 1 set |
| 5 | Hydraulic system | 1 set |
| 6 | Stainles steel template hook | 1 set |
Manufacturers of main components
| No. | Name | Manufacturer |
| 1 | PLC PLC | Mitsubishi/Omron |
| 2 | Frequency converter | INVT |
| 3 | Contactor | Schneider |
| 4 | Air switch | CHNT |
| 5 | Main hydraulic solenoid valve | Chaoyue |
Installation & adjustment
1.Seller will send 1-2 technicians to guide the equipment installation and trial run.
2.The installation duration is about 10 days.
3.Buyer should pay the service fee of $60 each day per person for seller’s technicians. Buyer should pay the round trip ticket and board & lodging for seller’s technicians in buyer’s country.
4.The necessary conditions such as workshop, illumination and ventilation etc.
5.The construction of machine’s foundation support steel blocks.
6.The pipes & valves connected to the inlets/outlets of machine.
7.The necessary device, facilities and skilled worker for the installation and trial run.
8.Electric power, connected to main electric cabinet;
9.The necessary material such as raw material etc.
10.The other relevant tools for the installation and trial run.
Warranty
1.The duration for quality guarantee is 12 months after installation and working the machine.
2.Within the duration, if machines fail to operate due to machine quality problem not to operator’s incorrect operation, Seller will send engineer to repair, the labor and material cost is free, the air tickets, board& lodging cost will be at the charge of buyer; beyond the duration, all service fee should be at the charge of Buyer.
3.Buyer pays food & room for Seller’s technicians in Buyer’s country.
(0)
